AiM MXG - Manual (Page 11)

RACESTUDIO3 SOFTWARE
20 21
MXG
Please don’t forget to select the proper ECU
brand and model to which connect your
MXG.
After having entered the MXG
configuration page, you can see different
tabs, which are useful for selecting one of
the following configuration features:
n Overlay
n Shiftlights and Alarm
n Channels
n ECU stream
10.1.1 Display Configuration
After selecting the OVERLAY configuration
feature, the following page appears:
It is divided in two different sections.
On the right, you can select one among
different layouts, while on the right you will
manage the different fields, selecting the
proper information to be shown, the
parameters, labels and the units of
measure.
You can add up to eight pages.
Please use the lower left part of the display
for configuring each channel.
You can define:
n The channel
n The name
n The unit of measurement
n The end of scale for every channel shown
on the page
When the panel shows the desired
configuration, push “SAVE” or “CLOSE” for
saving the configuration.
In case you have connected your MXG to
the PC, a “TRANSMIT” pushbutton is
available for transmitting the new
configuration to your device.
CHAPTER 10