AiM SoloDL - Manual (Page 13)

You are going to use Race Studio 2 software
for:
• Upgrading the track list
• Downloading the test data to your PC
• Analyzing the test data
Aim constantly updates Race Studio 2 soft-
ware. Each new release is available free to
download from our web site www.aim-spor-
tline.com, download Area/Software section.
Software Installation
To install Race Studio 2 software just place
the CD in the proper driver and wait for a
few seconds.
The system will ask the user:
• To choose if reading the documentation
or installing a software: select the second
option;
• Which software to install: select Race
Studio 2: the installation will start
automatically.
RACE STUDIO SOFTWARE
SoloDL Configuration
SoloDL can receive data from your
Engine Control Unit.
You can use RaceStudio2 for specifying the
ECU of your vehicle and for selecting the
desired information.
Once you have verified that the vehicle ECU
is supported, just follow this procedure
with SoloDL switched on and connected to
the PC:
• Run Race Studio 2 software
• Click on AIM System Manager
• Select ECU Manufacturer and model
• Enter configuration and vehicle name
• Select the desired information to be
received
• Press OK.
• Only in case the ECU does not transmit
the engaged gear activate
“System configuration” logger and set “
calculated” gears;
• Press Transmit
Please, refer to AIM website www.aim-spor-
tline.com >> “ECU connection” area to
know which ECUs are currently supported
by AIM devices.
CHAPTER 6
24 25