AiM LCU-One CAN for MyChron4 660 - Manual (Page 6)

LCU-ONE CAN connected to MyChron4 660
User Manual
Release 1.04
www.aim-sportline.com
2
Chapter 3 – Connection to MyChron4 660
Connecting Lambda controller to MyChron4 660, the system automatically recognises the
peripheral at start up.
Warning: connect LCU-ONE CAN to MyChron4 660 OFF.
In case the only available peripheral is LCU-ONE CAN, it can be connected directly to
Mychron4 660 through the back connector labelled as EXP/PC.
In the following picture, LCU-ONE CAN is connected to MyChron4 660 through Data
Hub, the CAN connections multiplier.
Though the system is powered through Lambda controller connected to the battery, it is
suggested to leave MyChron4 660 internal batteries in the logger.
Lambda controller switches automatically off when MyChron4 660 is switched off.