AiM LCU-One CAN for MXL/EVO3 - Manual (Page 12)

LCU-ONE CAN connected to MXL and EVO3
User Manual
Release 1.05
Note
: LCC_diagnosys channel shows LCU-ONE working status and can show up to
four messages:
• 0: status OK
• 1: probe not connected
• 2: +12V short circuit
• 3: GND short circuit
The configuration is now ready to be transmitted to the logger.
Warning: the configuration is to be repeated on all LCU-ONE connected to the logger.
Once all parameters have been set and fields assigned, the configuration needs to be
transmitted to the logger pressing “Transmit” on Race Studio 2 top keyboard. If the
transmission is ok no message is shown. If, on the contrary, LCU-ONE serial number
has not been get, the window here below appears. It tells the user that no serial number
has been assigned to the connected expansion. Close this window pressing “Cancel”
and get the expansion serial number as explained in the previous pages.
www.aim-sportline.com 11