AiM Data Key User Manual
Page 3
Data Key
User Manual
Release 1.01
2
www.aim-sportline.com
Download the firmware and run it. This panel appears:
It is made up of two parts.
On top (1) it shows on the left firmware versions included in the downloaded file and on
the right firmware versions installed on Data Key.
Bottom (2) it shows Data Key possible working modes.
Please pay particular attention to the selected option because of it is stored by the
key and restored at each usage. It is strongly recommended to check each time
that the selected option is the desired one.
According to the selected option different situations can occur.
If each time Data Key is connected to MyChron4 firmware updating starts it means the
second option has been selected.
In case firmware updating is attended, the file has been downloaded and run but the
procedure does not start, the third option has been selected.
If for any reason firmware downgrading is wished, the file is installed on the Data Key but
installation is not successful, the first option has been selected.