AirLive AirMax DUO - Manual (Page 176)

7. Command Line Interface
AirLive AirMax DUO User’s Manual 168
7.5 Enable/Disable Commands
Commands to enable or disable settings
( enable/disable ): <enable | disable> upnp
Purpose: To enable or disable UPnP
Example:
Command>enable upnp
(Upnp)descDocName: BD.xml
UPnP Daemon: Intializing UPnP with descDocUrl=http://192.168.1.1:80/BD.xml
UPnP Daemon: ipaddress=192.168.1.1 port=80
UPnP Daemon: conf_dir_path=/var/upnp
Initializing UPnP SDK ...
UPnP SDK Successfully Initialized.
Setting the Web Server Root Directory to /var/upnp
Succesfully set the Web Server Root Directory.
UpnpGetServerPort(): 49152
Registering the root device with descDocUrl http://192.168.1.1:49152/BD.xml
IGD root device successfully registered.
Advertisements Sent. Listening for requests ...
Command> disable upnp
Shutting down on signal 15...
UPnP is disabled
<enable | disable> snmp
Purpose: To enable/disable SNMP
Example:
Command> enable snmp
SNMP is enabled
Command> disable snmp
SNMP is disabled