AirLive AirMax DUO Lite - Manual (Page 34)

3. Configuring the AirMax DUO Lite
AirLive AirMax DUO Lite User’s Manual 26
3
3.
Configuring the
AirMax DUO Lite
The AirMax DUO Lite offers many different types of management interface. You can
configure through standard web browser (http), secured web (https), command line (telnet),
secured command shell (SSH, SSH2), and SNMP management. In this chapter, we will
explain AirMax DUO Lite’s available management interfaces and how to get into them.
Then, we will provide the introduction on Web Management and recommended initial
settings.
3.1 Important Information
The following information will help you to get start quickly. However, we recommend you to
read through the entire manual before you start. Please note the password and SSID are
case sensitive.
The default IP address is: 192.168.1.1 Subnet Mask: 255.255.255.0
When using Web UI, the login as follow:
User name: admin
Password: airlive
When using telnet, the password is: airlive
When using SSH/SSH2, the login as follow:
Login : root
Password: airlive
The default radio mode for Wireless1 and Wireless2 is: 802.11a
The default SSID for Radio 1 is: AirLive1
The default SSID for Radio 2 is: AirLive 2
The default wireless mode is : Dual AP Mode
After power on, please wait for 2 minutes for AirMax DUO Lite to finish boot up
Please remember to click on “Apply” for new settings to take effect
Please remember to enter the correct “Distance” parameter in wireless settings.
Failure to do so can result in poor performance.
The default country code is : United Kingdom
If you are living outside of EU, please go to Operation Mode->Setup->Regulatory
Domain to change country.