AirLive ES-6000 - Manual (Page 26)

25
3.6 Software Update
To update firmware, please go to System Æ Software Update and follow the steps below:
Step1. Version Number indicates the current version that is running. Log onto Internet to obtain the
latest version of firmware and download it onto the ES-6000 built-in hard disk.
Step2. Click Browse, then Choose File window pops up, after that, please select the latest firmware
from the directory where it was saved earlier.
Step3. Click the lower right OK, it will start running the update procedure. (Figure 3-13)
Figure 3-13 Software Update
It takes about 3 minutes to run through the update process, and will automatically reboot after the
system is updated. Please do not turn off the power, disconnect the Internet or close the Web UI while
running update. These acts might cause an error in the system. (Running the update in the local area
network is strongly recommended.)