AirLive GW-300NAS - Manual (Page 9)

1. Introduction
AirLive GW-300NAS User’s Manual 5
How to Operate
DO NOT connect WiFi Broadband Router to power before performing the installation
steps below.
Step 1.
Screw the antenna in a clockwise
direction to the back panel of the
unit.
Step 2.
Plug the RJ45 cable into LAN port
1~4 and connect with your PC or NB.
Step 3.
Plug your RJ-45 into the WAN port
and connect with your xDSL modem.