AirLive IP-2000VPN - Manual (Page 64)

Remote IP addresses
Type
• Single address - enter an IP address in the "Start IP address" field.
• Range address - enter the starting IP address in the "Start IP address" field, and
the finish IP address in the "Finish IP address" field.
• Subnet address - enter the desired IP address in the "Start IP address" field,
and the network mask in the "Subnet Mask" field.
The remote VPN should have these IP addresses entered as its "Local" addresses.
3. Click Next to continue. The screen you will see depends on whether you previously selected "Manual Key
Exchange" or "IKE".
Manual Key Exchange
These settings must match the remote VPN.
You cannot use both AH and ESP at the same time.
AirLive IP-2000VPN User’s Manual 61