AirLive NAS-235 - Manual (Page 9)

2. Getting Familiar with your NAS
AirLive NAS-235 User’s Manual 4
Status (Amber)

ON – This LED will be On during the Startup self-test; it
will turn Off once the self-test is completed. If it stays
ON, there is a hardware error.

OFF
– Normal operation.

Blinking
– During a software upgrade, both the Status
and Ready LEDs will blink.
Ethernet 
ON
– Link established.

OFF
– No LAN connection.

Blinking
– Data is transmitted or received via the LAN.
Disk Active 
OFF
– Idle.

Blinking – Hard disk is being accessed.
Disk Full 
ON - Disk is completely full. No more data can be
stored on this disk

OFF -Normal operation, disk is not full.

Blinking - Disk is 98% full (The Buzzer will also beep 3
times.)
Disk 1 
ON – Disk 1 installed

OFF – Disk 1 not installed

Blinking
– Raid 1 Rebuilding
Disk 2 
ON
– Disk 2 installed

OFF
– Disk 2 not installed

Blinking
– Raid 1 Rebuilding
USB 1 
ON - USB device connected to the USB port

OFF - No USB device installed

Fast Blinking - Data being transferred to or from the
USB device
USB 2 
ON - USB device connected to the USB port

OFF - No USB device installed

Fast Blinking - Data being transferred to or from the
USB device