AirLive P-203N User Manual

Page 46

Advertising
background image

203.66.191.12

pserver

2. Add an entry to the host’s /etc/bootptab file, similar to the following:

hostname:\

:ht=1:\

:ha=print_server_ethernet_address:\

:ip=print_server_ip_address:

Lines should be indented with tabs.

Where hostname is the device name of a print server, the ht=1 tag specifies

the hardware type is Ethernet, the ha= tag specifies the Ethernet address of a

print server, which is the Node ID located on the print server. The ha tag must

be preceded by the ht tag. The ip= tag should correspond to the IP address you

want to assign to the print server.

For example, a print server with the following configuration:

Node ID: 0000B4010101 (this implies Ethernet

address is 0000B4010101),

IP address: 203.66.191.12

The entry for this print server in the /etc/bootptab file should be:

PS010101:\

:ht=1:\

:ha=0000B4010101:\

:ip=203.66.191.12:

41 AirLive P-203N User’s Manual

Advertising