AirLive POE-FSH2422G-250 User Manual
User’s manual
Advertising
Table of contents
Document Outline
- 1. Introduction
- 2. Installation of the Switch
- 3. LED Indicators
- 4. Web Management
- 4.1 Setup your computer for Web management
- 4.2 Remote Management
- 4.3 Get into the Web Management
- 4.4 Administrator
- 4.5 Authentication Configuration (Administrator menu)
- 4.6 System IP Configuration (Administrator menu)
- 4.7 System IP Configuration (Administrator menu)
- 4.8 Load default setting (Administrator menu)
- 4.9 Firmware Update (Administrator menu)
- 4.10 Reboot Device (Administrator menu)
- 4.11 Port Management
- 4.12 Port Configuration (Port Management menu)
- 4.13 Port Mirroring (Port Management menu)
- 4.14 Bandwidth Control (Port Management menu)
- 4.15 Broadcast Storm Control (Port Management menu)
- 4.16 POE (Port Management menu)
- 4.17 VLAN Setting
- 4.18 VLAN Mode (VLAN Setting)
- 4.19 VLAN Member (VLAN Setting)
- 4.20 Multi to 1 Setting (VLAN Setting)
- 4.21 Per Port Counter
- 4.22 Trunking
- 4.23 QoS Setting
- 4.24 Priority Mode (QoS Setting)
- 4.25 Port, 802.1p, IP/DS based (QoS Setting)
- 4.26 TCP/UDP Port Based (QoS Setting)
- 4.27 Security
- 4.28 MAC Address Binding (QoS Setting)
- 4.29 TCP/UDP Filter (QoS Setting)
- 4.30 Spanning Tree
- 4.31 STP Bridge Settings (QoS Setting)
- 4.32 STP Port Settings (QoS Setting)
- 4.33 Loopback Detection Settings (QoS Setting)
- 4.34 Backup/Recovery
- 4.35 Miscellaneous
- 4.36 SNMP
- 4.37 Logout
- Appendix A: Product Specifications
- Appendix B: Troubleshooting