AirLive Skyphone-1000 - Manual (Page 18)

Wireless USB Phone User’s Manual
Wireless Phone Display Link Status
mode.
The RF link is established but AirLive SkyPhone-1000 is not
active.
Action: Launch AirLive SkyPhone-1000.
The RF link is established but Skype is not active or AirLive
SkyPhone-1000 is not allowed to access Skype.
Action: Launch Skype. Also, allow AirLive SkyPhone-1000 to
access Skype (refer to “Managing AirLive SkyPhone-1000
Access to Skype” on page 10).
Standby mode.
To resume for standby mode, just press the OK key on the
phone.
N/A
The wireless phone is switched off or running off the power.
Action: Power on your wireless phone or charge the wireless
phone.
Notes on Establishing Wireless Link
„ Your wireless phone and dongle are packaged as an exclusive pair. They
share a unique ID to communicate only to each other. This means your
wireless phone cannot link to a dongle other than the one delivered with the
wireless phone and vice versa. Likewise, you cannot expect the wireless
phone to work with multiple dongles and vice versa.
„ Currently up to 7 pairs of wireless phone and dongle can co-exist within one
radio range. The more pairs are present, the more likely interference will occur
and thereby reduce the transmission range.
„ The maximum outdoor wireless range is about 30 meters while indoor range is
about 15 meters in an open-air environment. If you cannot make the link, move
the wireless phone closer to the dongle.
14 S kyphone-1000 User’s Manual