AirLive Traveler3G - Manual (Page 49)

6. General Setup
47 AirLive Traveler 3G User’s Manual
MTU Please input the MTU value of your network connection here. If you
don’t know, you can use default value.
Connection Type
Please select the connection type of Internet connection you wish
to use (detailed explanation listed below).
Continuous – The connection will be kept always on. If the
connection is interrupted, the router will re-connect automatically.
network traffic is not sending or receiving after an idle time.
Manual – After you have selected this option, you will see the
“Connect” button and “Disconnect” button, click “Connect” and the
router will connect to the ISP. If you want to stop the connection,
please click “Disconnect” button.
Idle Time Out If you have selected the connection type to “Connect-On-Demand”,
please input the idle time out.
After you finish with all settings, please click “Apply” button and the following message will
be displayed on your web browser:
Connect On-Demand – Only connect when you want to surf the
Internet. “Idle Time Out” is set to stop the connection when the
Please click “Continue” to back to previous setup menu; to continue on other setup
procedures, or click “Apply” to reboot the router so the settings will take effect (Please wait
for about 60 seconds while router is rebooting).
ton.
If you want to reset all settings in this page back to previously-saved value, please click
“Cancel” but