AirLive Traveler3G II - Manual (Page 93)

89
AirLive Traveler 3G II User’s Manual
Address.
To check the IP Address assigned to the wireless adapter, follow the steps below:
1.Enter ipconfig /all in command mode
2.Enter ping 192.168.1.1.to check if you can access the Traveler 3G II
3. Why does my wireless connection keep dropping?
You may try following steps to solve.
• Antenna Orientation.
1: Try different antenna orientations for the Traveler 3G II .
2: Try to keep the antenna at least 6 inches away from the wall or other objects.
• Try changing the channel on the Traveler 3G II , and your Access Point and Wireless
adapter to a different channel to avoid interference.
• Keep your product away (at least 3-6 feet) from electrical devices that generate RF
noise, like microwaves, monitors, electric motors, etc.
4. Why I am unable to achieve a wireless connection?
Note: An Ethernet connection is required to troubleshoot the Traveler 3G II .
If you have enabled Encryption on the Traveler 3G II , you must also enable encryption
on all wireless clients in order to establish a wireless connection.
• For 802.11g, the encryption settings are: 64 or 128 bit. Ensure that the encryption bit
level is the same for both the Traveler 3G II , and your Wireless Client.
• Ensure that the SSID (Service Set Identifier) on the Traveler 3G II and the Wireless
Client are exactly the same.
If they are not, your wireless connection will not be established.