AirLive WHB-5854A - Manual (Page 49)

AirLive WHB-5854A Wireless Outdoor Bridge
49
GLOSSARY
Auto Reboot
Specifies the enable/disable of auto reboot function for auto recovery.
Authentication Type Specifies open-system or shared key.
Authentication / Deauthentication
Always 0 for Bridge
Bridge Distance Enter the value (1 – 28 KM) to specify the distance between a pair of bridges.
Cipher Advertised
Specifies current state of advertised cipher negotiations, AES and/or
WEP, and None.
CRC Errors
Specifies the number of receive CRC errors.
Data Rate
Specifies rate of data transmission. Best selection will adapt the rate to the best
available.
Data / Management / Control Packets can either be data, control, or management.
Specifies the number of packets sent and received for each.
Discarded Frames - receive Specifies the number of receive discarded frames.
Discarded Frames - transmit Specifies the number of transmit discarded frames.
DMA Errors – receive
Specifies the number of receive DMA errors.
DMA Errors – transmit
Specifies the number of transmit DMA errors.
Duplicate Frames
Specifies the number of receive duplicate frames.
Encryption
Specifies the enabled state of encryption either yes or no.
Errors
Specifies the error count for both transmit and receive.
Excessive Retries
Specifies the number of transmit excessive retries.
Fragment Length
Specifies the fragment length. Enter a value between 256 and 2346.
MSDU
Maximum service data unit. Specifies the number of packets sent and
received by Bridge.
Multicast
Specifies the number of multicast packets both sent and received.
PHY Errors Specifies the number of receive PHY errors.
Receive Errors
Specifies the number of receive errors.
RSSI AUX Output
Specifies the activation of RSSI AUX Output for antenna alignment.