2 virtual server, Virtual server – AirLive WIAS-3200N User Manual
Page 63
7. Access Network without Authentication
AirLive WIAS-3200N User’s Manual
60
7.2 Virtual Server
Configure Virtual Server, go to: Network >> Network Address Translation >> Public
Accessible Server.
This function allows the administrator to set 20 virtual servers at most, so that client
devices outside the managed network can access these servers within the managed
network. Different virtual servers can be configured for different sets of physical services,
such as TCP and UDP services in general. Enter the “External Service Port”, “Local
Server IP Address” and “Local Server Port”. Select “TCP” or “UDP” for the service’s
type. In the Enable column, check the desired server to enable. These settings will
become effective immediately after clicking the Apply button.