AirLive WN-350R User Manual
Page 97
2. System and Network Setup
WN-350R User’s Manual
88
Root AP SSID (6):
In ‘Universal Repeater’ mode, this device can act as a
station to connect to a Root AP. You should assign the
SSID of the Root AP here or click ‘Select Site Survey’
button to choose a Root AP.
Site Survey (7):
Click ‘Select Site Survey’ button, then a “Wireless Site
Survey Table” will pop up. It will list all available access
points near by. You can select one access point in the
table and the router will join wireless LAN through this
access point.
After you finish the wireless setting, please click ‘Apply’ button, after you click
‘Apply’, the following message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on router
setup, or click ‘Apply’ to reboot the router so the settings will take effect
(Please wait for about 30 seconds while router is rebooting).