AirLive WP-201G V2 - Manual (Page 85)

AirLive WP-201G v2 User’s Manual
77
1: enable
IPP IPP printing is enabled or
disabled
0: disable
1: enable
admin# get IPP
IPP_ENABLE=1
RAW RAW printing is enabled or
disabled
0: disable
1: enable
admin# get RAW
RAW_ENABLE=1
9.4 Modify Setting Values – “set” Command
“set” command is used to modify the setting values of this print server. The format of “set” command is as
follows:
set argument_name value
Then the value will be written into the system configuration. For example, if you want to set IP address of the
print server to 192.168.2.2, type “set ip 192.168.2.2” command and the IP of the print server will be changed.
After the setting is finished, please reboot the print server.
admin# set ip 192.8.2.2
admin# reboot
If you enter only “set”, the system will list all arguments of “set” command and the command format.
The following table lists all the arguments whose value can be modified by “set” command:
Argument
Description Example
psname Print server name set psname PS001
password Login password set password 1234
username Login username set username admin
wlfunc Enable or disable the
wireless LAN function.
The value should be
“disabled”, “enabled” or
set wlfunc auto