Aladdin Light Lift ALL300RM-CM-240V - Manual (Page 11)

STEP 17
Attach conduit assembly to 3/4” conduit connector mounted below chandelier pulley. Once completely
inserted, tighten set screw on conduit connector. See Diagram K.
Never attach or adjust the conduit assembly improperly. This could interfere with the automatic shutoff
system and could cause the chandelier to fall, which could cause death, personal injury, and/or property
damage.
STEP 18
Attach 1/2” conduit connector on ceiling box to bottom of conduit assembly. Once completely inserted,
tighten set screw on conduit connector. See Diagram K.
Never attach or adjust the conduit assembly improperly. This could interfere with the automatic shutoff
system and could cause the chandelier to fall, which could cause death, personal injury, and/or property
damage.
STEP 19
Position chandelier pulley assembly where ceiling box will be centered in ceiling hole. Weight and bottom
contact plate assembly should hang down through ceiling hole. See Diagram K.
3/4” Conduit
Connector
Telescopic Conduit Assembly
1/2” Conduit Connector
ALL300RM Ceiling Box
Sheetrock Sheetrock
4 1/2”(11.4 cm) Hole
Diagram K