The stereo return channel, St1 input, St2 input – Allen&Heath GL3800 User Manual

Page 19: Aux sends, Mute, Routing, Fader

Advertising
background image

GL3800 User Guide

19

The STEREO Return Channel

Two additional dual stereo return channels are provided. Each has
two stereo line inputs which can be mixed together or used
separately. ST1 and ST3 can be routed directly to LR instead of the
return channels. This gives you the flexibility of mixing in four more
stereo sources in a small panel space.

ST1 INPUT

A level control adjusts from fully off to +16dB gain.

The L input signal is normalled through the R input socket so that a
mono source may be plugged in to feed both left and right sides of the
stereo channel. A recessed switch can be set to route the source
directly to the L-R mix instead of the return channel. Use a pointed
object to change the switch setting.

ST2 INPUT

A level control adjusts from fully off to +16dB gain.

The L input signal is normalled through the R input socket so that a
mono source may be plugged in to feed both left and right sides of the
stereo channel.

AUX SENDS

Use these controls to feed the return signal to a

combination of the auxes. The stereo signal is summed to feed Aux 1
and Aux 2 in mono. The signal feeds aux 9-10 in stereo. Internal
jumper options are provided to set the auxes pre or post-fader. Default
setting is post-fade so that the fader provides master control for all the
sends.

MUTE

When pressed, all the channel pre and post-fade signals are

turned off except ST1 or ST3 if routed direct to LR.

PFL

Press PFL to display the summed L+R pre-fade channel signal

on the monitor meters and listen to it in the headphones and local
monitor without affecting the main outputs.

ROUTING

Routes the left signal to L and odd group 1 or 3, and the

right signal to R and even group 2 or 4, and sums L and R to feed the
M mix in mono. Return channel ST1-2 can be routed to Groups 1-2,
and ST3-4 can be routed to Groups 3-4.

FADER

A 60mm stereo fader provides +10dB maximum boost

above its normal unity gain 0dB position.

Applications for the stereo channels and returns are described later in
this user guide.

30

O

O

5

20

10

0

5

10

DUAL STEREO RETURN

STEREO

STEREO

ST4

ST3

MUTE

DIRECT TO

LR

GAIN

L-R

3-4

M

GAIN

+6

9-10

AUX

2

AUX

1

AUX

OO

+6

OO

+6

O

O

PFL

-10

-20

10

16

-5

0

5

O

O

-10

-20

10

16

-5

0

5

O

O

Advertising