Allen&Heath GL2400 - Manual (Page 15)

GL2400 User Guide 15
GROUP, L, R, M OUT The main console mix outputs are on
electronically balanced XLR. These produce the professional standard
+4dBu when the meters read ‘0’, and provide up to a maximum +25dBu.
The L and R outputs typically feed the house PA system in live sound
mixing, or a 2-track recorder in studio mixing. In monitor mode, these
outputs reverse with the Aux TRS jack connections.
AUX OUT 1-6 Each aux send is available on an impedance balanced
TRS jack operating at -2dBu line level. An internal option is available to fit
a balanced line driver IC to provide an electronically balanced output
operating at +4dBu. Note that it is not usual to require this option as the
impedance balanced standard drive provides sufficient interference
rejection when feeding balanced equipment inputs. The aux sends are
typically used to feed monitors, effects devices such as reverb and delay,
and for special mix requirements. In monitor mode, these outputs reverse
with the group and LR XLR connections.
MATRIX OUT 1-4 Each matrix output is available on an impedance
balanced TRS jack operating at -2dBu line level. An internal option is
available to fit a balanced line driver IC to provide an electronically
balanced output operating at +4dBu. The matrix outputs are typically
used for stereo or mono recording or broadcast feeds, delay and fill
speakers, zone feeds, additional monitors such as IEM, hearing assist
loops and so on.
MATRIX EXT IN 1-4 Each matrix has an unbalanced 0dBu line level
TRS jack input. An external signal such as ambience mix, additional or
sub mixer, remote source, reference tone and so on may be mixed in to
each matrix. The inputs are normalled as shown in the diagram here.
This means that you can plug in just one jack (EXT1) as a common
source to all matrix, two jacks (EXT1,2) as a common stereo source to
matrix pairs, or four independent sources. This is ideal for adding mono
or stereo ambience to recordings or in-ear monitors fed from the matrix.
2-TRACK IN and OUT Unbalanced TRS jack outputs and TRS
inputs connect to popular recording and playback devices such as CD,
MiniDisc, computers and tape machines. Nominal line level is -2dBu.
The 2-track SEND always follows the post-fade LR mix regardless of
mode switch configuration. The 2-track RETURN can be used for
monitoring a mono or stereo recording, or as a simple input for playback
of walk-in and background music. The L input normals through the R
socket for plugging in a mono source on a single jack.
MONITOR OUT These impedance balanced line level TRS jack
outputs follow the post-level monitor signal. Separate sockets are
provided for the L and R signals. Use these to feed local speaker or other
monitor systems.
SYS-LINK V2 OPTION A blank plate is fitted here as standard.
The GL2400 Sys-Link V2 (version 2) input/output option kit is available
from Allen & Heath. Refer to OPTIONS later in this guide.
SYS-LINK V2 CONSOLE EXPANDER ( option )
OUTPUT INPUT
OUT
M
OUT
R
OUT
L
GRP
4
GRP
3
GRP
2
GRP
1
6
AUX
5
AUX
4
AUX
3
AUX
2
AUX
1
AUX
LISTEN WEDGE AUX 6 AUX 5 AUX 4 AUX 3 AUX 2 AUX 1
R L GRP 4 GRP 3 GRP 2 GRP 1
GRP/AUX REVERSE
Operating Modes
In FOH mode, LR feeds the
main PA. M sums the L and R
post-fade signals to provide an
additional feed for a mono fill
speaker or zone, or a main feed
into a mono PA. Groups 1-4
may be used for multitrack
recording, zone feeds and so
on, or simply left unconnected
where they are used as
‘subgroups’ to LR for level
masters and/or inserted
processing.
In monitor mode Groups 1-4
and LR XLRs and inserts
become the aux mix masters.
M becomes the engineer’s
listen wedge AFL/PFL feed.
This configures the console
with 6 main stage monitor and
an engineer’s output. The
groups and LR are still available
via the matrix to provide yet
more monitor feeds.
3
MTX
EXT
4
MTX
EXT
2
MTX
EXT
1
MTX
EXT
IN IN IN IN
3 4 2 1
IN1
IN2
IN3
IN4
MATRIX EXT IN
L/M R
L R
2TRK OUT
2TRK IN
MONITOR
L R OUT