Allen&Heath Analogue Interface - Manual (Page 8)

Allen & Heath 8 GS_R24 Balanced Analogue Module User Guide
25 PIN D TYPE CONNECTOR PINNING
Analogue Input & Output 25 way D connector pin ident.
IN No. Designation
1 CH 8 HOT
2 CH 8 GROUND
3 CH 7 COLD
4 CH 6 HOT
5 CH6 GROUND
6 CH 5 COLD
7 CH 4 HOT
8 CH 4 GROUND
9 CH 3 COLD
10 CH 2 HOT
11 CH 2 GROUND
12 CH 1 COLD
13 NOT CONNECTED
14 CH 8 COLD
15 CH 7 HOT
16 CH 7 GROUND
17 CH 6 COLD
18 CH 5 HOT
19 CH 5 GROUND
20 CH 4 COLD
21 CH 3 HOT
22 CH 3 GROUND
23 CH 2 COLD
24 CH 1 HOT
25 CH 1 GROUND
Pin assignment (Input or Output connectors)
The pin assignment of the 25 pin D Sub Miniature type
connectors conforms to the TASCAM DB-25 pin-out
standard developed over 15 years ago.
Multicore cable assemblies are readily available from
audio equipment suppliers or general electronic com-
ponent suppliers such as Farnell and CPC in the UK.
When choosing ready made cable assemblies, ensure
that the cable mounted D Sub connector is a 25-Pin
Male type.
Connection guidelines & notes
1 13
14 25