16 call monitors, 17 busy lamp field (blf), Onitors – Allworx 9102 Phones User Manual

Page 24: Ield, Blf)

Advertising
background image

Phone Guide – 9102 / 9112

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

© 2007Allworx Corp. All rights reserved. Allworx is a registered trademark of Allworx Corporation. All other names may be trademarks or registered

trademarks of their respective owners.

Revised: October 10, 2007

Page 20

• Slow flashing red means a call has been parked on this Parking Orbit, but not by this handset.

When the Parking Orbit PFK light is flashing, you will be able to pick up a call in the Parking Orbit by
pressing the PFK or Speakerphone button for hands-free mode, or by using your handset or headset and
then pressing the PFK.

Note: Parked calls can be answered without a designated Parking Orbit PFK by dialing 701 – 709 from

any handset.

6.16 Call Monitors

Call Monitors are created and programmed by your System Administrator. The System Administrator can
define the PFKs on your Allworx phone for one or more Call Monitors.

The Call Monitor PFK may be in one of several states:

• Off (not lit) means the Call Monitor is idle, no incoming call.
• Fast flashing green means there is an incoming call (wit the handset set to ring).
• Green means there is an active call on this handset.
• Fast flashing red means there is an incoming call (with the handset set not to ring).
• Slow flashing green means an active call is on hold by this handset.

When the Monitor PFK light is flashing, you will be able to pick up the call by pressing the PFK or
Speakerphone button for hands-free mode, or by using your handset or headset and pressing the PFK.

6.17 Busy Lamp Field (BLF)

Another user’s phone can be linked to a PFK on your phone. The PFK will automatically dial the user’s
extension when pressed. The BLF PFK will flash red when the user has an incoming call and it will be solid
red when the user is on the phone.

Note: This requires the phone to be programmed in PBX Behavior by your System Administrator.

Advertising
This manual is related to the following products: