10 call forwarding, 11 paging zones, 12 conference center – Allworx 9102 Phones User Manual

Page 21: 13 allworx message center, Orwarding, Aging, Ones, Onference, Enter, Llworx

Advertising
background image

Phone Guide – 9102 / 9112

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com

© 2007Allworx Corp. All rights reserved. Allworx is a registered trademark of Allworx Corporation. All other names may be trademarks or registered

trademarks of their respective owners.

Revised: October 10, 2007

Page 17

6.10 Call Forwarding

Dialing 45 + an extension will forward any call that come into the phone to that extension.
To disable Call Forwarding for the phone, dial extension 450.

6.11 Paging Zones

Dialing 46# (# representing a Paging Zones 0 through 9) on the phone will broadcast audio to any other
phones that are members of the Paging Zone, which is set up by the System Administrator.

6.12 Conference Center

There are four Conferences Bridges on the 24x and one Conference Bridge on the 6x that support up to 8
callers. A Conference can be scheduled using the directory page but can also be held without scheduling.

Users can join a Conference by dialing extension 408 from the Auto Attendant, any phone on the network, or
by being transferred to the extension by another user. An Auto Attendant shortcut my also be setup by the
System Administrator to access the Conference Center. A Conference ID and password are required in order
to enter the conference.

Note: For more information refer to the Allworx Conference Center Guide found on the website at

www.allworx.com/support/downloads/default.asp.


The 24x supports up to 4 simultaneous conferences while the 6x supports only one conference. Default
Conference IDs and Pins for unscheduled conferences are shown in the table below:

Server

Conference ID

Password

6x, 24x

480

480

24x 481 481
24x 482 482
24x 483 483



Note: The 10x does not support N-Way Conferencing.

6.13 Allworx Message Center

The Allworx Message Center can be reached by:

1. Dialing 6 + your extension from any office phone or from the company Auto Attendant, if calling from an

outside line.

2. Pressing the Messages button on any Allworx phone.

The Allworx Message Center allows the user to:

Advertising
This manual is related to the following products: