Allworx 9102 Phones - Manual (Page 26)

Phone Guide – 9102 / 9112
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007Allworx Corp. All rights reserved. Allworx is a registered trademark of Allworx Corporation. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: October 10, 2007
Page 22
3. Choose the desired number of the saved speed dial on the keypad.
The System Administrator can set up a PFK to serve as a speed dial. The top-most PFK will be associated
to Speed Dial 0, the next PFK will be associated to Speed Dial 1, etc.
7.3 Preferences
1. Press the CONFIG soft key button.
2. Press the Down arrow button to select Preferences. Press the Select button.
3. Select from the following list using the Up / Down navigation arrows to make the changes:
a. LCD Contrast – Controls the contrast of the display. Use the Volume bar or Up / Down arrows to
adjust.
b. Call History Size – Number of calls kept in History. 0 – 99 (Default: 99).
c. Clock Mode – Time Display for LCD Screen.
i. Off
ii. 12 Hour (Default)
iii. 24 Hour
d. Hold Reminder Mode – How the hold reminder should act.
i. No Reminder
ii. On Hook
iii. Timer (Default)
iv. On Hook and Timer
e. Redial Memory – To have the last number dialed stored in the phone.
i. Enabled (Default)
ii. Disabled
iii. Timed
f. Audible Dialing – Tones are heard when a key is pressed.
i. Enabled (Default)
ii. Disabled
g. Call Timer Display – Displays the length of time during a call.
i. Enabled (Default)
ii. Disabled
h. Intercom Auto Answer – When a call is placed to a phone using the Intercom button, the phone
receiving the call will automatically answer using Intercom/Speakerphone.
i. Enabled (Default)
ii. Disabled