Altman Lighting Chalice - Manual (Page 19)

Lighting
BRINGING IMAGINATION TO LIGHT
Lighting
BRINGING IMAGINATION TO LIGHT
M a n u a l I N S T A L L A T I O N & O P E R A T I O N
Chalice Series
57 Alexander St., Yonkers, NY 10701 Tel: 914-476-7987 Visit our website at www.altmanlighting.com
© 2012 Altman Stage Lighting, Inc.
15
Specifi cations are subject to change without notice.
Ball Mount Details:
Set
Screw
Threaded
Ball
Ground
Screw
Canopy
Stem
Chalice
Fixture
Mounting
Screws
2 x 8--32x1.5”
Install the 1/4-20 flat head screw into
the center threaded hole of the cross
bar as shown. The Ground (green)
screw is used by the Electrician to
attach a wire to properly ground the
Chalice LED fixture.
Slide the canopy cover up onto the
1/4-20 center screw of the crossbar.
Assemble to 99-CC1/4-202P couplar
as shown and use it to hold the
canopy cover in place. The 18/3 SVT
power cable is fed into the junction
box using the offset hole and 99-102
strain relief provided in the canopy
cover.
Use two (2) 8-32 screws to attach
the crossbar to the junction box.
Not included
J-Box Connection Details: