Brother HL-2600CN Series - Manual (Page 164)

CHAPTER 5 MAINTENANCE
5-52
5. Remove the Protective Parts as
shown (do not remove ALL the
Protective Parts of the Duplex Unit).
Fig. 5-65
6. Pull out the connection cable located
at the bottom left hand side of the
Duplex Unit.
Fig. 5-66
7. Use the handholds of the Duplex Unit
to lift it up.
Fig. 5-67
Note
Ensure that the Duplex Cover Top Assembly is correctly aligned and latched
with the lower part of the Duplex Unit
! Caution
When lifting up the Duplex Unit, be careful NOT to nip your fingers between
the Duplex top assembly and the lower assembly.