Anchor NAVI-TRAC LITE PAVILLION - 12 TO 24 - Manual (Page 9)

9
Before placing frame in fi nal position, attach
frame attaching bracket to upright rear upper
splice on each rear upright.
Remove stablizer plate, washer and hex nut from rod
on bracket.
Insert rod into upright rear upper splice from back of
pavilion.
Place stabilizer plate, washer and hex nut back onto
rod so that bracket stays in place. Do not tighten until
frame and fabric are completely assembled and in-
stalled. Do not use stabilizer plate at corner uprights. •
•
•
Stablizer plate, washer
and hex nut
Plate for connection to
existing structure.
U-Shaped stabilizer may not
be used at corner uprights
due to fabric interference.
Stablizer plate may not
be used at corner up-
rights. Remove.
Figure 3b
Figure 3c