Anchor FIESTA FRAME TENT HIGH PEAK - Manual

Fiesta® High Peak Instructions -
Supplement to Standard Fiesta Installation Instructions
High peak casting adapter assembly must be attached to PTT peak
casting prior to assembling PTT to frame.
Slide top of peak casting assembly down into top of PTT. Slide bottom
plate up to bottom of PTT. Align holes in plates and insert the 3/8” x
3” bolts provided. Fasten with nuts.
Step 1 - Installing Fiesta High Peak Adapter Assembly
Top of peak adapter
assembly.
Bottom Plate
PTT
High Peak Tube Assembly
Hair pin cotter Safety pin lock
Figure 2
Step 2 - Installing Fiesta High Peak Tube
Assembly
High Peak Tube Assembly
Installed
EC 3986 FHP 0609