Tie down after lacing, Pole cap (optional) – Anchor CENTURY 40 WIDE User Manual
Page 5
LACE LOOP
SNAP
CENTER POLE HOLES
FLAP
RING
Then lace from center pole to eave on both
sides of tent. Tie off last long loop. Align
plates and attach hook to plates on inside of
tent, as shown.
FLAP
LACE ROPE
HOOK
PLATE
JUMP ROPE
WALL ROPE
SNAP
LAST
LACING
LOOP
POLE HOLE
RING
VIEW FROM OUTSIDE
VIEW
FROM
INSIDE
5
POLE CAP
MOLDED CAP W/
MALE THREADED
PIPE FITTING
MID
FABRIC
END
FABRIC
FEMALE PIPE
COUPLING (FLANGED)
POLE PLATES
(OVERLAPPED)
L
ACE
LINE
TIE DOWN AFTER LACING
After lacing and snapping sections, attach guys and
insert loosely into tension
winches.
Insert guy web into slot in winch drum and
rotate 1 1/2 to 2 times to secure web.
WEB
RELEASE
(Push Downward)
Winch
Drum
Guy Web
5
WEBS
ATTACHED
LOOSELY
LACE
SEE WEB GUY LAYOUTS FOR
STAKING CONFIGURATIONS.
POLE CAP (Optional)
Overlap the pole hole plates in the mid and end
fabric lace line. Push fabric and plates up into
cap and secure from underneath by threading the
female, flanged pipe coupling onto the male pipe
fitting molded to the inside top of the pole cap.
4