Anchor 5-STAR SOLID SAFETY POOL COVER - Manual (Page 11)

FIG. 11A
Drilling/Setting of 3/8” Drop-in Anchors
1) Drill a hole into base material to the depth of embedment (see information above) required. Do not over drill hole. Blow the
hole clean of dust and other material. Insert the drop-in anchor into the hole and tap flush with surface. Using setting tool, set
drop-in anchor by driving the tool into the drop-in anchor until the shoulder of the tool is seated against the drop-in anchor.
EMBEDMENT
3/8” Drop-in Anchor
Drill Diameter - 1/2”
Minimum Depth - 1 7/8”
FIG. 11B
RAISED WALL
CABLE
CLAMPS
CABLE
CLAMPS
EYEBOLT
END
HOOK
END
CABLE
CABLE
CABLE
COVER
SNAP
WEATHER FLAP
CABLE
ANCHOR BOLT
RUNNING CABLE THROUGH
IN-LINE HOLES ON SLOTTED
CABLE ANCHOR BOLTS
ATTACH CABLE TO EYEBOLT ON TURNBUCKLE
ATTACHING SNAP TO CABLE
TURNBUCKLE
TURNBUCKLE
EXTENDED
APPROX. 18”
EYEBOLT
FIG. 11C
FIG. 11E
FIG. 11D
CABLE
ANCHOR
BOLT
SLOTTED
CABLE
ANCHOR
BOLT
11