APG PG-5000 datasheet - Manual

1
Automation Products Group, Inc.
1025 West 1700 North
Tel. 1/888/525-7300
Logan, UT 84321 USA Fax 1/435/753-7490
w w w . a p g s e n s o r s . c o m
s a l e s @ a p g s e n s o r s . c o m
PG-5000 Digital Pressure Gauge
APG
Automation Products Group, Inc.
®
PG-5000
■
Large, full 4 digit display
with 0.5 in. characters
■
Available ranges from vacuum
up to 500 psi, and from 0 up to
10,000 psi
■
Microprocessor-based circuit has
“TARE” capability standard
■
Display capability to 9999
■
Self-powered by standard 9 V
battery
■
±0.25% accuracy of full scale (on
selected ranges)
■
Gauge reference pressure
■
Internally compliant to CE
■
On/off button
Digital Pressure Gauge
Options
■
Other units of measure available
■
Other process connection fittings
available
■
16-minute auto-off optional at no
extra cost
■
Rear pressure port
■
Peak-hold
■
Zero adjust knob
■
0-2 VDC output (battery
powered)
■
4-20 mA output (loop powered)
■
0-5 VDC output (external power)
■
Up to ±0.1% full scale accuracy
with NIST certification, on
selected ranges
■
Cleaned for oxygen service
■
For OEM applications or other
configurations, consult factory
Accessories
■
Panel mount flange (rear pressure
port only)
■
AC to DC external power supply
■
Shock dampening rubber boot
■
Operational Description
Battery powered digital gauge
offers full four digit display.
The PG-5000 four-digit display
unit incorporates an all-stainless
steel sensor. The sensor is resistant
to most typical exposures of
vibration and shock. The APG
gauge is also less sensitive to the
effects of pulsating pressures, a
major advantage when compared
to vibration sensitive dial gauges.
Available options include peak hold,
4-20 mA two wire, 0-2 VDC, and
0-5 VDC outputs.
■
Applications
No special tools or adaptors
are required for installation of the
PG-5000. This makes the unit an
easy, cost effective replace ment for
less accurate, standard mechanical
gauges. The unit’s long life, ease
of operation, high accuracy, and
low cost make it perfect for all
applications where standard 2.5 in.
or larger mechanical gauges have
been used.
Rev. 10.08