ArcOne Carrera, Europe - Manual (Page 6)

- 5 -
Significance of markings on
Auto Darkening Filters:
Example: 4 / 9-13 AR 1/3/1 EN379
CE - European Conformity Mark
4 – Light Shade number
9 – Dark Shade range 1
13 – Dark Shade range 2
AR – Manufacturers mark
1 – Optical Class
3 – Diffusion of Light Class
1 – Variation in Luminous Transmittance class
EN379 – Standard for Auto-Darkening
welding filters
*This model has been certified by:
Certottica SCARL
Zona Industriale Villanova
32013 Longarone (BL), Italy
Notified Body Number: 0530
Model Certified by: ***DIN CERTCO
Gesellschaft für Konformitätsbewertung mbH
Alboinstr. 56
D-12103 Berlin
Notified Body Number: 0196
Significance of CE Markings on Carrera
Welding Helmet**:
Example: AR EN 175 –F CE
AR - Company Identification Mark,
EN 175 - CE Welding Helmet Standard,
-F – Impact Class,
CE – European Mark
**This model has been certified by: INSPEC
56 Leslie Hough Way
Salford
Greater Manchester
M6 6AJ, England
Notified Body Number: 0194
Warning, In situations where protection against high speed particles at extreme temperatures
is required, use only eye-protectors with the letter T immediately following the impact letter, i.e.,
-FT, BT or AT. If the impact letter is not followed by the letter T then the eye protector shall only
be used against high speed particles at room temperature.
Parts Selection Guide (Non-Removeable Center Section)
(see Filter Removal Diagram for replacing Filter and Cover Plates)
02-HG
Headgear Assembly
AD Filter 03-OP/04-OP
Inside Polycarbonate
04-OP
Front Polycarbonate
**CARRERA-911-S
Helmet Shell
Figure 8B