ARNOVA 7c G2 - Manual (Page 5)

5
Chip
ENGLISH
To configure a new WiFi network, go on the Home screen, tap on the Menu icon , then
select Settings .
In the Settings screen, select Wireless & networks .
If the WiFi is off, tap on the Wi-Fi line to turn it on. Then select Wi-Fi settings .
The ARNOVA will scan for available WiFi networks and display them at the bottom of
the screen.
Tap on the network you want to connect to, enter the required network information* and then
tap on
Connect . Your ARNOVA will now attempt to establish a connection to that WiFi hot spot
with the network parameters you entered.
CONNECTING TO A 3G NETWORK
Inserting your SIM card
IMPORTANT: Before inserting a SIM card, you must turn off the device.
Switch off the device.
Insert the SIM card in the SIM card slot.
Make sure to have the chip side up when you insert it.
Turn on the device.
A Pin number may be requested. Enter the SIM card pin number.
Your device will attempt to connect to the 3G network of your provider.
Your Arnova 7c G2 is equipped with a SIM card slot. Any standard SIM card can be inserted. There is no provider restriction.
Note that the Arnova 7c G2 will only have signal if you are in an area covered by your 3G provider’s 3G or EDGE network.
1
2
3
4
NOTE: If your device does not connect to
your 3G provider’s network:
1. Contact your 3G provider to obtain the
connection parameters.
2. On your device, tap the Menu icon, then
settings.
3. Select Wireless & networks > Mobile
networks.
-In Network operators, select your operator.
-In Access Point Names, select the correct
access point name and enter the exact con-
nection parameters.