Buffalo Technology TeraNavigator none - Manual (Page 15)

1
If you don’t know your LinkStation’s IP address, there are
several ways to get it.
One simple method is to use the Buffalo NAS Client Utility
(included on your CD) to find your LinkStation(s). Just click
on the tab for your LinkStation and you’ll be able to read its
IP address. You must have a Windows PC running on the
network to use the Buffalo NAS client. See page 51 for more
on the LinkStation client utility.
You can always get the LinkStation’s IP address from your
router’s configuration utility. Many Buffalo routers list this
information on the Client Monitor page, as shown to the right.
Consult your router’s documentation for instructions on
identifying the LinkStation’s IP address.
Accessing LinkStation Data from a Mac