Artograph LED 300 Owners Manual - Manual (Page 21)

21 ENTERTAINMENT
ENTERTAINMENT
MY MEDIA
Connecting USB Storage
Devices
Connect USB storage devices such
as a USB flash drive or external
hard drive to the projector and use
multimedia features.
Connect a USB flash drive or USB
memory card reader to the projector
as shown in the following illustration.
USB memory
stick
To disconnect a USB storage device,
make sure to end the connection
properly to prevent damages to the
projector or files.
1
Press Q.MENU to access the quick
menus.
2
Press the Navigation buttons to
scroll to USB Device and press OK.
3
Disconnect the USB storage device
only when the message says that it
is safe to remove.
NOTE
y y After Eject USB, USB memory
cannot be read. Remove USB
memory, and connect again.