Atop Technology SE5002D User manual User Manual
Se5002d serial device server, User’s manual
Advertising
Table of contents
Document Outline
- Preface
- 1. Introduction
- 2. Getting Started
- 3. Software Setup
- 3.1 Configuration by Serial Manager
- 3.2 Configuration by Telnet Utility
- 3.2.1 Login to the System
- 3.2.2 Networking
- 3.2.3 Change the Password
- 3.2.4 COM1 Setup
- 3.2.5 Configure SE5002D as a TCP server
- 3.2.6 Configure SE5002D as a TCP Client
- 3.2.7 Configure SE5002D as a UDP
- 3.2.8 Enable/Disable Virtual COM
- 3.2.9 Enable/Disable Pair Connection
- 3.2.10 COM Port Setting
- 3.2.11 Emptying Serial Buffer
- 3.2.12 Setting Packet Delimiter
- 3.2.13 Accept Control Command from COM port
- 3.2.14 Backup EEPROM to Flash
- 3.3 Configuration Using Web Browser
- 3.4 Link Mode Configuration
- 3.5 TCP Server Application
- 3.6 TCP Client Application
- 3.7 UDP Application: Multi-Point Pair Connection
- 4. Using Virtual COM
- 5. Diagnostics
- 6. Specifications
- Appendix