Wiring, For service send to: auto meter products, inc – Auto Meter 1797 User Manual

Page 2

Advertising
background image

12 mONTh LImITed WARRANTY

Auto Meter Products, Inc. warrants to the consumer that all Auto Meter High Performance products will be free from defects in material and workmanship for a period of twelve (12) months from date of the
original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at Auto Meter’s option to the consumer, when it is determined by Auto Meter Products, Inc. that the product
failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of parts in the Auto Meter instruments. In no event shall this warranty exceed the original purchase price of
the Auto Meter instruments nor shall Auto Meter Products, Inc. be responsible for special, incidental or consequential damages or costs incurred due to the failure of this product. Warranty claims to Auto Meter
must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in
duration to the said 12 month warranty period. Breaking the instrument seal, improper use or installation, accident, water damage, abuse, unauthorized repairs or alterations voids this warranty. Auto Meter
Products, Inc. disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by Auto Meter.

SeRVICe

For service send your product to Auto Meter in a well packed shipping carton. Please include a note explaining what the problem is along with your phone number. Please specify when you
need the product back. If you need it back immediately mark the outside of the box “RUSH REPAIR,” and Auto Meter will service product within two days after receiving it. ($10.00 charge will be
added to the cost of “RUSH REPAIR.”) If you are sending product back for Warranty adjustment, you must include a copy (or original) of your sales receipt from the place of purchase.

FOR SERVICE SEND TO:

AUTO meTeR PROdUCTS, INC.

413 W. Elm St., Sycamore, IL 60178 USA (815) 899-0801

Email us at [email protected]

2650-972A 9/12/05

Wiring

COIL

12V BATTERY

12V IGNITION SWITCh (+)

GROmmeT

IN FIReWALL

GOOd eNGINe

GROUNd

Red

BLACK

BLACK

GR

ee

N

GReeN

eARLY

mOdeL IGNITION

eLeCTRONIC

IGNITION

OR

GReeN

Tach Terminal

CAUTION!

As a safety precaution, the +12V terminal of this product
should be fused before connecting to the 12V ignition
switch. We recommend using a 1 Amp, 3AG fast-acting
type cartridge fuse (Littlefuse® # 312 001 or an equivalent).

© 2005 Auto Meter Products, Inc.

FUSe

(See caution

below)

White light wire connects to dash lighting circuit or +12 volts.
Black light wire connects to Ground, battery neg(-).
Replacement bulb (#161) available at local auto parts store.

Red

+

-

WARNING

Warranty will be void if connected to coil
when using an aftermarket ignition box
such as, but not limited to products from
the following manufacturers: MSD, Crane,
Jacobs, Mallory, Holley, Etc.. Prior to
installation of your tachometer, check
with the ignition box manufacturer for
recommended tachometer signal location.

Advertising
This manual is related to the following products: