Auto Meter 201005 - Manual

Mounting
CSX-3022 Original Layout
SPEEDOMETER
TACHOMETER
Preliminary Steps
1. Read instructions thoroughly for the gauge(s) you purchased.
The installation of each gauge requires the expertise of a
trained mechanic. Please consult a qualified technician if
you have not had training on instrument installation.
2. Consult your vehicle’s repair manual to locate the appropriate
port in the firewall for the gauge you are installing. Also
locate the appropriate12V ignition switch wiring or fuse box.
3. Determine the best route for wires and speedometer cable to
follow. Choose a path free of hazards of moving parts or hot
engine components.
4. Determine correct mounting location illustrated above. Note:
It is important that each gauge be placed as indicated. Each
gauge is designed with its own hardware to fit the designated
position.
5. All efforts have been made to determine the correct gauge
location for Shelby Cobras. Although many cars were built
differently (special orders), the gauge locations indicated
above are logical and vintage original photos of CSX 3022
indicate this layout. We suggest you follow this pattern. In
order to retain our suggested original integrity, follow the
instructions correctly for the gauge(s) you purchased.
6. Assemble tools and parts required for installation.
7. Disconnect positive (+) battery cable from the battery during
gauge installation.
8. See each gauge installation instructions on the following
pages.
FOR SERVICE CONTACT: Auto Meter Products, Inc. 413 West Elm Street, Sycamore, IL 60178 USA
(815) 899-0801 or Email us at [email protected]
2650-951X-10 Rev. B 9/6/07
12 MONTH LIMITED WARRANTY
The manufacturer warrants to the consumer that this product will be free from defects in material or workmanship for a period of twelve (12) months
from the date of original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at the manufacturer’s option
to the consumer, when determined by the manufacturer that the product failed due to defects in material or workmanship. This warranty is limited to
the repair or replacement of parts and the necessary labor by the manufacturer to effect the repair or replacement of the product. In no event shall
this warranty exceed the original purchase price of the instrument, nor shall the manufacture be responsible for special, incidental or consequential
damages or costs incurred due to failure of this product. Warranty claims to the manufacturer must be transportation prepaid and accompanied with
dated proof of purchase. This warranty applies only to the original purchaser and is non-transferable. All implied warranties shall be limited in duration
to the said 12-month warranty period. Breaking the meter seal, improper use of installation, accident, water damage, abuse, unauthorized repairs or
alterations voids this warranty. The manufacture disclaims any liability for consequential damages due to breach of any written or implied warranty on
all products made by the manufacturer.
4 INCH SPEEDOMETER AND TACHOMETER
INSTALLATION INSTRUCTIONS
2650-951X-10 rev. B
Test Equipment