Bakers Pride BPCV-2-2W Manual - Manual (Page 4)

SINGLE OVEN
Assemble the leg/stand assembly as follows:
1. Remove legs from package.
2. Secure top frame parts to the legs with bolts provided (long angle - front & back. Short angle -
sides).
3. Place the oven on top of leg/stand assembly. Match holes on the frame with oven bottom base.
Fasten with bolts provided
If provided with optional bottom shelf and rack support: (Ref. Figure 1)
a. Screw the bottom shelf to the legs.
b. Screw rack guide support angles to bottom shelf & top leg frame.
DOUBLE OVEN
6" leg assembly is provided.
1. Match holes on the legs with oven bottom base and screw with bolts provided.
2. Set top oven on top of bottom oven.
3. Bolts down at rear and front as shown in Figure 2. Remove top kick plate to access screwing the
front bolts.
4. Assemble bottom flue extension as shown in Figure 2.
4