BAND-IT BT1000 Boss Tool - Manual (Page 9)

BT1000
BOSS TM Tool
www.band-it-idex.com
Document # P98750 Rev. B
© Copyright
BAND-IT-IDEX, Inc. 2013
All rights reserved Page 9
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Operating Manual
BT1000 BOSS TM Tool Manual
Thank you for purchasing BAND-IT products.
Operation
7. Joint inspection
Following illustration shows a proper joint
Sharp edged or deformed joints which do not appear as shown
have to be removed from the load and replaced immediately.
The tensile strength of these joints is insufficient and they could
cause serious injury.