BAND-IT J93099 Cutter Blade Kit - Manual (Page 2)

Installation
Instructions J93099
Cutter Blade Kit
Hand Tools Air Tools
CAUTION: To prevent breakage,
backing plate must be installed flush
with cutter blade.
Backing
Plate
Cutter
Blade
½” long
Leading
Edge
INCORRECT
Cutter Blade
CORRECT
Backing Plate
Hone these
surfaces
Rough edges on
clamp band are
indication of need to
hone cutter blade.
1-3/4” long – S750, S100
2” long – S350
Installation
Instructions J93099
Cutter Blade Kit
Hand Tools Air Tools
CAUTION: To prevent breakage,
backing plate must be installed flush
with cutter blade.
Backing
Plate
Cutter
Blade
½” long
Leading
Edge
INCORRECT
Cutter Blade
CORRECT
Backing Plate
Hone these
surfaces
Rough edges on
clamp band are
indication of need to
hone cutter blade.
1-3/4” long – S750, S100
2” long – S350