Barranca Diamond HP18 Slab Saw User Manual
Page 17
17
Adjusting countersink screw
Adjusting allen head screw
This adjustment will help the clutch block shoe to snugly engage the stainless steel feed screw by ap-
plying pressure to the brass pressure block below the carriage casting. Should you have trouble with
this adjustment, call Barranca Diamond at (800) 630-7682 for factory assistance in clutch adjustment.
Brass pressure block, feed
screw & clutch block shoe
Feed screw & clutch block shoe
Periodically, it will be necessary to replace the silicon bronze clutch block shoe once the 5/8"-18
threads are flattened or stripped. You may purchase the clutch block and pressure block direct from
the factory. See parts lists on pages 27 & 33 to order correct parts by part number and description of
part(s).
HP18 & HP24
STARTUP & ADJUSTMENT