Barranca Diamond MK-145 Tile Saw - Manual (Page 11)

11
MK-145 SAFETY
PRODUCT SPeCiFiCaTiONS:
The MK-145 is a versatile tabletop tile saw. Operated and used according to this manual, the
MK-145 will provide years of dependable service.
General Description:
The MK-145 tile saw is engineered as a self-contained wet saw consisting of a powerful 120V motor
in a hard plastic case. The saw is capable of cutting a tile up to (1) inch (25mm) thick. The water
basin located below the tabletop can be filled with ordinary tap water, and is easily cleaned following
use.
Motor Specifications:
Motor specifications for the MK-145 are listed in Table 2 below.
Blade Capacity:
The MK-145 uses a 4-1/2 inch diameter continuous rim MK Diamond blade with a 1/16-inch cutting
width. The MK 145 can miter cut at a 45-degree miter angle or a 22.5-degree angle for octagonal
shapes.
Tile Types:
The MK-145 can cut a variety of tile types including Porcelain, Terracotta, Marble, Quarry and Slate,
or almost any other non-ferrous material.
NOTe: The MK-145 is not designed to cut plastic or ferrous (metals) material.
iTeM lOCaTiON DeSCRiPTiON PaRT NO.
1 Switch Side General Safety Warnings 158315
2 Water Basin Water level warning N/A
3 Back Serial Number and Motor
Specifications 158316
Voltage 120V
Overall Amperage 4.0 A
Frequency 50/60 Hz
RPM 6000 rpm
Weight 11 lbs / 5kgs
Table 2