Beka Teacher’s Easel User Manual

Teacher’s easel, Warning – adult assembly required

Advertising
background image

1. Each easel is assembled and shipped ready

to use. Simply stand the easel upright and
open its legs for stability.

2. Swing the center storage tray into place,

placing the notches over the dowel below the
white board surface.

3. Push the wooden dowel pins into the holes

on the book lip’s flat surface.

4. Use the carriage bolts to attach the lip to the

easel.

5. Secure with the washers and wing nuts.

Be sure to test wipe-off markers on a corner of
the marker board before using, to insure easy
erasure. The marker should come off after
rubbing with a dry cloth. Please clean the
surface regularly, as any marker lines left on the
board for long periods may be difficult to
remove, and may stain the surface.

Book Lip

Center

Storage

Tray

Wipe-off

Marker board

Art Surface

Beka, Inc. • 542 Selby Avenue • St. Paul, Minnesota 55102 • USA

1-888-999-2352 • www.bekainc.com • 651-222-3965 fax

Teacher’s Easel

Contents:
1 – Easel, Assembled 2 – Carriage Bolts
1 – Wooden Book Lip 2 – Wing Nuts
2 – Wooden Dowel Pins 2 – Washers

Beka’s Teacher’s Easel is an adult-sized, single-sided easel. It features a wipe-off marker art
surface, a lip to support books or display pads, and a center storage tray. This easel has been
popular for use in classrooms, offices, and homes.

Warning – Adult Assembly Required!

Enclosed hardware includes sharp points and small pieces,

so may present hazards to children.

Once assembled, an adult should

check hardware periodically for tightness.

Dispose of plastic bags and unused hardware appropriately.

Advertising