Disassembly instructions, User maintenance instructions – BELLA 13694 High Power Juicer User Manual

Page 10

Advertising
background image

8

3. Plug the unit into a 120V AC electrical outlet.
4. Remove the food pusher from the feed tube.
5. Place produce into the feed tube. Use the food pusher to gently direct through

the feed tube and blade basket with the food pusher.

6. Turn the HIGH/OFF/LOW dial to HIGH to juice harder produce.
7. Turn the HIGH/OFF/LOW dial to LOW to juice softer produce.

NOTE: When juicing a combination of hard and soft produce, such as beets,

carrots and apples, you will want to use HIGH for beets and carrots and LOW

for the apples. You do not have to turn the machine OFF to change speeds.

Simply turn the dial to change to the appropriate speed for each type

of produce being juiced.

Tip: To ensure maximum efficiency, alternate types of produce.

8. Do not operate Juice Extractor for longer than 40 seconds at a time when juicing

heavy loads; if necessary, allow the Juice Extractor to cool down for 2 minutes

afterwards.

9. When juicing is completed, turn the HIGH/OFF/LOW dial to OFF.
10. Slide the pitcher out from the juice spout. Serve juice immediately for the freshest

flavor and highest nutritional value.

11. Remove the pulp basket and save or discard pulp.

NOTE: The pulp from your Juice Extractor can be used in many different

applications such as breads, muffins, cakes, soup stocks, compressed facial

packs and garden compost material.

12. Unplug the Juice Extractor from the outlet after use.
13. Follow Disassembly Instructions described in this manual; all removable parts

should be rinsed and cleaned after each use. Clean the Juice Extractor following

the procedures described in the Care & Cleaning Instructions.

DISASSEmBLY INSTruCTIONS

WARNING: ALWAYS MAKE SURE JUICE EXTRACTOR IS UNPLUGGED BEFORE

STARTING DISASSEMBLY.

1. Remove the pulp basket and juice pitcher.
2. Lift the locking clamp up and off the 2 clamp locking slots on the cover.

Rest the locking clamp at the front of the unit.

3. Lift Juice Extractor cover up and off the Juice Extractor.
4. Grasping the pulp spout in one hand and the back of the juice bowl

in the other, loosen and lift the juice bowl and blade basket off as one piece.

These 2 parts will then easily separate for easy cleaning.

CAUTION: Use care when handling the blade basket. Hold the basket’s rim only.

DO NOT TOUCH the cutter blades on the bottom of the basket. The cutter blades

are very sharp!

5. Please follow the procedures outlined in the Care & Cleaning Instructions

for specific cleaning instructions.

uSEr mAINTENANCE INSTruCTIONS

This appliance requires little maintenance. It contains no user serviceable parts.

Do not try to repair it yourself. Any servicing that requires disassembly other than

cleaning must be performed by a qualified appliance repair technician.

Advertising