BKI VGG Rotisserie Oven - Manual (Page 14)

Rotisserie Oven Operation
Software Controls – Programming Screens
Screen Name Screen Description
Startup Appears when the Main Power Switch is placed in the
on position.
Controller Off Appears after the Startup screen displays. Indicates that
the controller is turned off. Touching anywhere on the
screen will turn the controller on and display the Recipe
Selection screen.
Recipe Selection Appears once the Controller Off screen is touched.
Touch any recipe for 3 seconds to enter the
programming mode. Touch the X button for 3 seconds
to turn the controller off.
Program Security Appears upon entering the programming mode and is
used to enter a 4 digit passcode. When the controller is
first powered, 0000 is used to access the programming
mode. Upon subsequent access, if you don’t want to
use a special passcode but want to leave it 0000 just
press the GO button. If you do want to use a special
passcode, configure one using the Basic Setup screen.
Use the left and right arrow buttons to move the cursor
under the digit to be changed. The up and down arrow
buttons increase or decrease the digit as desired. Touch
the GO button to submit the security passcode. If the
passcode is valid the Programming mode Selection
screen will appear. If the passcode is invalid the
Program Security screen will reappear showing the
passcode you entered. Touch the X button to return to
the previous screen.
Program Mode
Selection Appears once a valid passcode is entered from the
Security screen. Touch the BASIC SETUP option to
change basic controller parameters. Touch the COOK
PROGRAMS option to change cook parameters for a
specific recipe. Touch the X button to return to the
Recipe Selection screen.
Basic Setup Appears when the BASIC SETUP option is touched
from the Programming Mode Selection screen. Use this
screen to configure the controller to display temperature
in Fahrenheit of Centigrade, to use short or long beeps
at the end of a cook cycle and to modify the four digit
passcode. Touch the X button to return to the previous
screen.
Recipe Edit
Selection Appears when the COOK PROGRAMS option is
touched from the Programming Mode Selection screen.
This screen is used to select the recipe you want to edit.
Use the up and down arrow buttons to highlight the
recipe then touch the EDIT button. Touch the X button
to return to the previous screen.
12