Online manual not for resale purposes – BLITZ Full Auto DC4 User Manual

Page 5

Advertising

2 - Manual timer

4 - Battery Voltage

"TIMER" The will not be an A visible.

times between 0 to 10 minutes

and press the MINUTE button. Make sure that the letter A does not appear.

3 - Temperature

5 - Stop Watch

**The temperature is accurate depending on where the control module is placed.

and 59 seconds.

the letter A will appear.

the letter A will disappear.

To clear the time press the SECOND button and hold it down for 5 seconds.

Page 5

Press the POWER button twice to get to the

When the unit is first turned on press the POWER button four times to display

manual timer mode. The screen will display

the Battery Voltage mode. This will display the vehicles Battery voltage.

When on Temperature display press the MINUTE

To set the time of the manual timer press the MINUTE button to set the number

button to activate the Automatic Timer function

of minutes you want the car to idle after the vehicle has been shut off. Press

the letter A will appear.

the SECOND button set the number of seconds desired. You can choose idling

When on Temperature display press the MINUTE
button to activate the Manual Timer function

** To activate the manual timer go to the BATTERY or TEMPERATURE display

the letter A will disappear.

When the unit is first turned on press the POWER button three times to display

When the unit is first turned on press the POWER button five times to display

the Temperature mode. The temperature sensor is in the control module.

the Stop Watch mode. This can be used to record the time it takes to get to

The Temperature is displayed in Celsius ONLY.

point A to point B. The Stop Watch will record times up to 9 minutes

When on Temperature display press the MINUTE

Use the MINUTE button for the Start and Stop Function keys. Use the

button to activate the Automatic Timer function

SECOND button for the lap button.

When on Temperature display press the MINUTE
button to activate the Manual Timer function

To start and stop the Stop Watch press the MINUTE button.
Press the Second button to jump to another Lap. There is 5 Laps available.
If the laps are full the LCD will display full when trying to record another Lap.

Warning-All images and text in this manual is the property of BLITZ Co.,Ltd. (Japan).

No part of this may be reproduced, stored in retrieval systems, or transmitted in any form or means without prior written premission of

BLITZ Co.,Ltd. (Japan)

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals